Instruction Manual EMA-85
24
Cleaning
Before you use the hand mixer the first time make sure you clean it thoroughly.
Also, clean the hand mixer multiple times during the day after use.
Always use standard cleansers for cleaning the hand mixer.
To clean between the two inserts, dip the tool up to the level of pollution in a
container with hot water.
Let the hand mixer some seconds to run, the tool is
self-cleaning.
To clean after use, remove the mixer from the motor block.
Clean the mixer bar
(3 or 4)
with a brush and hot water and degreasing agent.
Rinse the mixer bar
with fresh water and then disinfect them.
To clean the motor block
(1)
use only
a sponge.
Wipe with these over the surface of the motor block
(1)
.
Advice: Do not use any hard items to clean the hand mixer.
The motor block from the hand mixer is only protected
against splash water. Do not uses under flowing water,
high-pressure cleaner, steam cleaner or similar methods.
