manualshive.com logo in svg

Krone Swadro TC 880, Operating Instructions Manual

Share
Download
Krone Swadro TC 880 Operating Instructions Manual Download Page 61

 

Operation

 

61 

 

 

11 Operation 

 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

 

 

CAUTION! - Do not drive in reverse when using the machine for work. 

Effect: Damage to the machine. 
The machine is designed to travel forwards. Never reverse while the machine is in switched on 
and in working position. Lift rotors first. 

 

 

 

 

11.1 

Removing the tine protections from the tine tips  

 

1

3

SW9000013

2

Fig. 29 
• 

Turn off the tractor and secure it against the possibility of rolling back. 

• 

Remove the tine guards (1) from the machine. 

• 

Insert the tine guards into the support (2) and secure them with linch pins (3). 

• 

Repeat this process for the other machine side. 

 

Summary of Contents for Swadro TC 880

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands