manualshive.com logo in svg

Krone Swadro TC 880, Operating Instructions Manual

Share
Download
Krone Swadro TC 880 Operating Instructions Manual Download Page 108

Maintenance - Gearbox

 

 

108 

 

 

16 

Maintenance - Gearbox 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

 

Interval for oil level check and oil change: refer to chapter Maintenance “Maintenance Table” 

 

 

 

Oil quality / quantity: see "Consumables" in the Description of the machine section. 

 

 

 

Used oil disposal: see chapter Safety "Consumables" 

 

 

 

Prerequisite: 

• 

Outrigger arms are in working position, see chapter “Lowering Outrigger Arms into Working 
Position”. 

 

• 

Prepare the machine for servicing, repair, maintenance and adjustment work, see section 
Safety -> Safety routines "Preparing the machine for servicing, repair, maintenance and 
adjustment work". 

 

Summary of Contents for Swadro TC 880

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands