manualshive.com logo in svg

Krone Swadro TC 880, Operating Instructions Manual

Share
Download
Krone Swadro TC 880 Operating Instructions Manual Download Page 20

Safety

 

 

20 

 

 

4.4.17 

Dangers associated with certain activities: Work on the machine  

 

Work on the machine only when it has been shut down 

If the machine has not been shut down and safeguarded, parts may move unintentionally or the 
machine may start moving. As a result, people may be seriously injured or killed. 
• 

Before performing any work on the machine, such as making adjustments, cleaning, 
preparing for road travel, preparing for work, servicing or rectifying malfunctions, shut down 
and safeguard the machine, see chapter Safety "Shutting down and safeguarding the 
machine". 

 

 

Maintenance and repair work 

Incorrect maintenance and repair work will endanger operational safety. As a result, accidents 
may occur and people may be seriously injured or killed. 
• 

Only perform work which is described in these operating instructions. Before performing any 
work, shut down and safeguard the machine, see chapter Safety, "Shutting down and 
safeguarding the machine". 

• 

All other maintenance and repair work may be performed by a qualified service centre only. 

 

 

Raised machine and machine parts 

The raised machine may accidentally drop, roll away or overturn and crush or kill people. 
• 

Do not stand under the raised machine. First put the machine down. 

• 

Before performing any work under the machine, securely support the machine, see chapter 
Safety "Securely supporting the raised machine and machine parts". 

• 

Before performing any work on or under raised machine parts, lower the machine parts or 
secure them mechanically with rigid safety supports or with a hydraulic shut-off device to 
prevent them from dropping. 

 

 

Danger associated with welding work 

Improper welding work will endanger the operational safety of the machine. As a result, 
accidents may occur and people may be seriously injured or killed. 
• 

Before performing welding work on the machine, obtain the consent of KRONE customer 
service and, if required, identify alternatives. 

• 

Have welding work performed by experienced technicians only. 

 

Summary of Contents for Swadro TC 880

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands