Krone Swadro TC 880, Operating Instructions Manual

Page: 37 / 128

Control and Display Elements
37
7 Control and Display Elements
The following table shows the functions on the machine (depending on machine design)
Function Description
Crank at left rotor • Increase or reduce the rotor height of the left rotor.
Crank at right rotor • Increase or reduce working height of right rotor.
Single-action control unit
(red 1+)
From transport position to working position:
• Pull the operating cable and keep it under tension.
• Float position (red 1+): Lowers the machine from
transport position to working position.
Headland position:
• Pressure (red 1+): Raises the machine from working
position to headland position.
• Float position (red 1+): Lowers the machine from
headland position to working position.
From working position to transport position:
• Switch off PTO drive.
• Pull the operating cable and keep it under tension.
• Pressure (red 1+): Raises the machine from working
position to transport position.
Double-action control unit
(blue 2+/ blue 2-)
Increasing the working width
• Pressure (blue 2+): Increase the working width.
Reducing the working width
• Pressure (blue 2+): Reduce the working width.