Krone Swadro 38 T Original Operating Instructions Download Page 50 | Manualshive

Page: 50 / 66

Krone Swadro 38 T Original Operating Instructions Download Page 50

Maintenance

50

Pos : 110.17.1 /Ü bersc hriften/Ü bersc hriften 2/P-T/R eifen @ 0\mod_1197357995667_78.doc @ 18075

10.6

Tyres

Pos : 110.17.2 /BA/Sic her hei t/Gefahrenhi nweis e/F alsc he Rei fenmontage @ 0\mod_1197358162433_78.doc @ 18132

Warning! - Tyre fitting incorrect

Effect: Injuries or damage to the machine
•

Fitting tyres requires sufficient knowledge and the availability of proper tools!

•

If tyres are not correctly fitted, it could explode when pumped up. This can cause serious
injury. If you do not have sufficient experience of fitting tyres, have tyres fitted by the
KRONE dealer or a qualified tyre specialist.

•

When fitting tyres on the wheel rims, the maximum pressure given by the tyre
manufacturer must not be exceeded. The tyre or even the wheel rim could explode
and/or burst.

•

If the tyre heels do not fit properly when the maximum permitted pressure is reached, let
out the air, align tyres, lubricate the tyre heels and pump up the tyre again.

•

Detailed information about how to fit tyres onto agricultural machinery can be obtained
from the tyre manufacturers.

Pos : 110.17.3 /BA/Wartung/R eifen/Reifen-Luftdruc k allgemei n @ 0\mod_1199956852616_78.doc @ 37365

10.6.1

Tyre air pressure

Check the tyre pressure at regular intervals and refill if necessary. The tyre pressure depends
on the size of the tyres. The values are listed in the table.

Pos : 110.17.4 /BA/Wartung/R eifen/Sc hwader/R eifen- Luftdr uc k Tabell e Schwader 46T @ 7\mod_1215763026485_78.doc @ 105587

Type

Tyre identification

Tyre pressure [bar]

Tandem axle

18 x 8.50-8 6 PR

1,0

Pos : 110.17.5 /BA/Wartung/M utter n und Schr auben (50h) anziehen @ 0\mod_1196949864530_78.doc @ 15293

Note

Regularly check that nuts and bolts are tightly in place (approx. every 50 hours) and tighten
them if necessary.

Pos : 110.18 /BA/-----Seitenumbr uch------ @ 0\mod_1196175311226_0.doc @ 4165

«
...
48
49
50
51
52
...
»

Summary of Contents for Swadro 38 T



































































Reviews:

No comments