2
Safety
2.5
Safety labels on the machine
28
Original Operating Instructions 150000802_00_en
Danger when exceeding the maximum per-
mitted PTO speed or the maximum permit-
ted operating pressure
When exceeding the permitted PTO speed,
machine parts may be destroyed or be hurled
up uncontrollably.
When exceeding the maximum permitted op-
erating pressure, hydraulic parts may be dam-
aged.
As a result, people may be seriously or fatally
injured.
Observe the permitted PTO speed.
Observe the permitted operating pressure.
5. Order no. 27 002 459 0 (1x)
Danger due to machine parts which fold
out or swivel out unintentionally
Risk of injury for road users due to machine
parts that could fold down or swivel out unin-
tentionally.
Whenever transporting the machine or
driving on roads, make sure that the stop
cock is closed.
6. Order no. 942 196 1 (2x)
Risk of crushing or shearing
Risk of injury due to crushing or shearing
points on moving machine parts.
While parts are moving, never reach into
areas where there is a risk of being
crushed.
7. Ord. no. 939 529 0 (2x)
Danger from high-pressure liquid
The pressure accumulator is under gas and oil
pressure. There is a risk of injury when the
pressure accumulator is not removed or re-
paired properly.
Observe the notes in the operating
instructions before removing and repairing
the pressure accumulator.
The pressure accumulator must only be
removed and repaired by a specialist
workshop.
8. Order no. 939 471 1 (1x)
