Krone Comprima CF Quick Start Manual Download Page 6 | Manualshive

Page: 6 / 34

Krone Comprima CF Quick Start Manual Download Page 6

Operation

6

Pos: 4.17 /Überschriften/Überschriften 3/F-J/F/F olie ei nleg en_F olienbi ndung @ 339\mod_1430986783595_78.docx @ 2569835 @ 3 @ 1

2.1.3

Inserting Film

Pos: 4.18 /Bei packs/R undball enpressen/F olienbi ndung/Modulgruppen F olie ei nleg en / LED Lichtl eiste/Hi nweise: KR ONE Foli e verwenden @ 396\mod_1446721934236_78.docx @ 2819018 @ @ 1

Note

For trouble-free field operation, KRONE recommends KRONE excellent RoundWrap film. This

film can be ordered by stating material number 00 926 947*. The film has a length of 2000 m,

a width of 1280 mm and a thickness of 16 µm.

Pos: 4.19 /Bei packs/R undball enpressen/F olienbi ndung/Modulgruppen F olie ei nleg en / LED Lichtl eiste/Beschr eibung 1: Foli e einl egen_Beschädigung en an F olie entfer nen_Beipackab2016 @ 470\mod_1471497559042_78.docx @ 3177205 @ @ 1

• Before the film is inserted, check whether the film is damaged.

If the film is damaged:
•

Unroll damaged film and cut it off.

•

Cut away the lateral bulges.

Pos: 4.20 /BA/Bedi enung /Rundballenpresse/F olienbindung/F olie einl egen_N etzschwinge nach vorn fahr en_bil d_alle Compri ma_Beipackab2016 @ 475\mod_1473085868453_78.docx @ 3210468 @ @ 1

COM00480

3

2

1

Fig. 3

Pos: 4.21 /BA/Bedi enung /Rundballenpresse/F olienbindung/F olie einl egen_N etzschwinge nach vorn fahr en_text_alle C ompri ma_Bei packab2016 @ 475\mod_1473085801678_78.docx @ 3210437 @ @ 1

•

Move the net rocker arm (3) forwards using the terminal until a distance of 5 cm between

the fixed deflection roll (2) and deflection roll (1) is established, see chapter Terminal –

Menus, "Menu 10 'manual operation'".

Pos: 4.22 /Bei packs/R undball enpressen/F olienbi ndung/Modulgruppen F olie ei nleg en / LED Lichtl eiste/Z BBP1802_2: F olie ei nleg en @ 470\mod_1471440877689_78.docx @ 3177012 @ @ 1

ZBBP1802_2

1

2

3

4

Fig. 4

Pos: 4.23 /Bei packs/R undball enpressen/F olienbi ndung/Modulgruppen F olie ei nleg en / LED Lichtl eiste/Beschr eibung 1: Foli e einl egen_alle Comprima_Beipackab2016 @ 470\mod_1471497688883_78.docx @ 3177236 @ @ 1

Inserting a film roll

•

Insert the film roll (2) and align it centrally to the machine.

•

Check whether the film roll (2) is centrally aligned by measuring to the side walls.

•

Slide the adjusting ring (1) and (4) up to the inner cardboard roll (3) and secure it.

Pos: 4.24 /Bei packs/R undball enpressen/F olienbi ndung/Modulgruppen F olie ei nleg en / LED Lichtl eiste/Z BBP1798: F olie ei nlegen @ 317\mod_1423127669005_78.docx @ 2454207 @ @ 1

«
...
4
5
6
7
8
...
»

Summary of Contents for Comprima CF



































Reviews:

No comments