manualshive.com logo in svg

Krone Comprima CF, Quick Start Manual, Page: 25 / 34

Share
Download
Krone Comprima CF Quick Start Manual Download Page 25

 

Important Settings for Film Tying

 

25 

 

Pos: 6.35.1 /Überschriften/Überschriften 2/A-E/A/Abstr eifer  zur Spiral walze ei nstellen @ 351\mod_1436865841043_78.docx @ 2630190 @ 2 @ 1 

 

3.5 

Setting Scraper to Spiral Roller 

Pos: 6.35.2 /BA/Wartung/R undball enpresse/Foli enbindung WartungAufkl eber Spir al walze_Foli enbindung_Ei nleitung @ 363\mod_1440056812644_78.docx @ 2675445 @  @ 1 

 

The following information label is attached to the machine: 

Pos: 6.35.3 /BA/Wartung/R undball enpresse/Foli enbindung WartungAufkl eber Spir al walze_Foli enbindung_Bild @ 363 \mod_1440056497394_78.docx @ 2675385 @  @ 1 

 

COM00416

27 018 237 0

1

2

 

Fig. 24 
 

Pos: 6.35.4 /BA/Wartung/R undball enpresse/Foli enbindung WartungAufkl eber  Spir al walze_Foli enbindung_Text @ 363\mod_1440057581614_78.docx @ 2675507 @  @ 1 

 

• 

Ensure that the scraper (2) rests closely against the spiral roller (1). 

• 

When the scraper (2) does not rest closely against the spiral roller (1), set the scraper as 

described below. 

 

Pos: 6.35.5 /BA/Wartung/R undball enpresse/Foli enbindung Wartung/Abstreifschi ene und Abstr eifverstär ker einstell en_F olienbi ndung_Vor aussetzungen @ 350\mod_1436516210521_78.docx @ 2627242 @  @ 1 

 

Prerequisites: 
– 

The tailgate is opened and is locked hydraulically; refer to chapter entitled Safety 

Equipment “Stop Cock Tailgate”. 

– 

The side guard on right-hand machine side is opened. 

Pos: 6.35.6 /Layout M odule /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 6.35.7 /Überschriften/Z wischenüberschriften/A-E/Abstr eifverstärker l ösen @ 351\mod_1436861044462_78.docx @ 2629617 @  @ 1 

 

Loosening scraper reinforcer 

Pos: 6.35.8 /BA/Wartung/R undball enpresse/Foli enbindung Wartung/Abstreifverstär ker lösen-festziehen_F olienbi ndung_Bild @ 350\mod_1436509673712_78.docx @ 2627008 @  @ 1 

 

COM00400

1

3

1

3

4

2

Fig. 25 

Pos: 6.35.9 /BA/Wartung/R undball enpresse/Foli enbindung Wartung/Abstreifverstär ker lösen_F olienbindung_T ext @ 350 \mod_1436509950104_78.docx @ 2627302 @  @ 1 

 

Three scraper reinforcers (3) are mounted additionally on the scraper rail (1). These scraper 

reinforcers and the scraper rail (1) should rest against the spiral roller (2). 
To set the scraper rail (1), loosen the scraper reinforcers (3): 
• 

Loosen the screw connections (2). 
The scraper reinforcers (3) can be moved in the oblong hole. 

Pos: 6.35.10 /Layout Module /---------------Seitenumbr uch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima CF



































Reviews:

No comments