Important Settings for Film Tying
19
Pos: 6.5 /Ü berschriften/Ü berschriften 2/P-T /R/R ückhaltekamm bei Foli enbindung einstell en @ 396\mod_1446714519910_78.docx @ 2818558 @ 2 @ 1
3.1
Setting the Retaining Comb for Film Tying
Pos: 6.6 /Bei packs/R undballenpr essen/Foli enbindung/M odulgruppen U mbau 2015/ZBBP1971, ZBBP1998: Rückhaltekamm monti eren @ 475\mod_1473074436515_78.docx @ 3209172 @ @ 1
ZBBP1971_1
A
A
x
y
Fig. 14
ZBBP1998_1
B
x
y
Fig. 15
Pos: 6.7 /Bei packs/R undballenpr essen/Foli enbindung/M odulgruppen U mbau 2015/ZBBP1999: Rückhaltekamm monti eren @ 475\mod_1473074824019_78.docx @ 3209203 @ @ 1
ZBBP1999_2
z
u
Fig. 16
Pos: 6.8 /Bei packs/R undballenpr essen/Foli enbindung/M odulgruppen U mbau 2015/Beschrei bung 3: R ückhaltekamm montier en @ 387 \mod_1445261043920_78.docx @ 2775004 @ @ 1
The trapezoidal rubbers (x) on the
bottom side of the retaining comb
are premounted with the
short side to the rear in direction of travel. (A)
If the blue strips (y) of the first net feed roller are taken along delayed or if they are not taken
along, turn the trapezoidal rubbers (x) (B). This will allow for additional support:
•
Unscrew the hexagon head screws on all trapezoidal rubbers.
•
Dismount the sheet strip on all trapezoidal rubbers.
•
Turn all trapezoidal rubbers (x) so that the short side points towards the front (B) in
direction of travel.
•
Mount sheet strip with hexagon head screws.
Mind the correct alignment of the sheet strips (z). The borehole (u) on the sheet strip (z) shows
in the direction of the retaining comb.
Pos: 6.9 /Layout Modul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
Summary of Contents for Comprima CF
Page 33: ......