manualshive.com logo in svg

Krone Comprima CF, Quick Start Manual, Page: 12 / 34

Share
Download
Krone Comprima CF Quick Start Manual Download Page 12

Operation

 

 

12 

 

Pos: 4.50 /Überschriften/Überschriften 3/K-O/M/M enü 1-4 " Bindestartverzög erung" @ 369\mod_1441785195167_78.docx @ 2703590 @ 3 @ 1 

 

2.2.2 

Menu 1-

4 “Tying Start Delay” 

Pos: 4.51 /BA/Info-C enter/ALLE T ermi nals in ei nem - ISOBUS, D elta, BET A II (ab BJ 15/16)/ALLE T er minals/R undball enpressen/M enü 1-4_4 Bi ndestartverzögerung_Einl eitung _ALLE T er minals_Comprima_Forti ma @ 357\mod_1438839181674_78.docx @ 2657813 @  @ 1 

 

Tying start delay is used to set the period of time that has to be passed between completion of 

round bale in the bale chamber and triggering the tying process. The tying start delay is set in 

seconds. 
 

Pos: 4.52 /BA/Info-C enter/ALLE T ermi nals in ei nem - ISOBUS, D elta, BET A II (ab BJ 15/16)/ALLE T er minals/R undball enpressen/M enü 1-4 Bi ndestartverzögerung (Foli enbindung)_Bild_ALLE Ter mi nals_Compri ma CF C V_+ X-treme @ 367\mod_1441348202818_78.docx @ 2696546 @  @ 1 

 

IBT000028

n

 

IBT000215

1,0

0,0

0.0

s

 

Fig. 11 

Pos: 4.53 /BA/Info-C enter/ALLE T ermi nals in ei nem - ISOBUS, D elta, BET A II (ab BJ 15/16)/ALLE T er minals/R undball enpressenMenü 1-4 Bindestartverzöger ung (Folienbindung)_T ext_ALLE Ter mi nals_Compri ma CF C V_+ X-treme @ 409\mod_1450268478634_78.docx @ 2893588 @  @ 1 

 

Prerequisite 

– 

Menu 1 “Settings Baler” is active, refer to chapter Terminal - Menus, menu 1 “Settings 

Baler”. 

– 

Film tying is selected in menu 1-8 “Selection Type of Tying”, refer to chapter Terminal - 

Menus, menu 1-8 “Selection Type of Tying”. 

 

• 

Select 

  to open the menu. 

The display shows menu 1-4 “Tying Start Delay”. 

 

Feature film tying 

For film tying, the tying start delay is set automatically to 0.0 s. KRONE recommends this 

setting. 
 
At high driving speeds, the tying start delay for film tying can be set to a minimum: 
• 

Increase or reduce the value, refer to chapter entitled Terminal - Menus “Changing the 

Value”. 

• 

Save value. 

 

Pos: 4.54 /Layout M odul e /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Summary of Contents for Comprima CF



































Reviews:

No comments