Kronan Duo, Manual

Page: 53 / 60

51
Refitting the fabric
A
Seat unit
do as stated below:
Place the seat plate in the pocket on the lower surface of the seat unit fabric. It is a
tight fit, in order to ensure that the plate will be held firmly in place.
Pull the seat unit fabric over the seat unit.
Mount the seat plate and the back support.
Mount the harness in the fabric and attach it to the seat unit.
draw the fabric over and close all fasteners, buckles and hook-and-loop tape.
Mount the hood fabric on the hood frames and attach the hood fasteners at the hood
frames. Figure A.
Attach the hood to the seat unit using the zip and insert the attachments down into
the holders on the seat unit. Mount the frame.
1
2
3
4
5
6
1
2
B