Kronan Duo, Manual

Page: 54 / 60

52
Care and maintenance
Chassis
Keep the chassis free of dirt and salt. Rinse it off, dry and lubricate the joints, etc.
Lubricate axles and other metal parts approximately every three months. use a suitable
lubricant.
Check regularly that all chassis locks are working properly. Check also that screws and
bolts are undamaged and properly tightened.
Spray plastic parts with silicone spray approximately every six months. Silicone spray can
be obtained from well-stocked petrol stations and grocery shops.
Brake
Clean the brake occasionally, rinse it off and lubricate it, in order to maintain an effective
brake function. We recommend sewing machine oil.
Wheels
Always use wheel protection when wheeling across sensitive surfaces indoors.
Adjusting the axles
You should adjust the axles after a few months’ use. If you notice that the pushchair tends
to veer to one side, or if you feel that the wheels are wobbling, this can be corrected by
adjusting the wheel axles. do as stated below,
Figure A:
Remove the wheel from the chassis.
Remove the axle through the central hole in the wheel.
Be careful not to get dirt or oil on your clothes.
Set the relevant end of the axle in a vice or locking pliers.
Turn the bolt approximately half a turn clockwise.
Mount the axle back on the wheel.
Mount the wheel back on the chassis and make sure that it is firmly attached.
If the wheel is not firmly attached to the chassis, you must remove it and the axle
again, then turn the bolt approximately a quarter of a turn anticlockwise.
1
2
3
4
5
6
7
8