Kromschroder BGT SA-8U/1DP Operating Instructions Manual Download Page 2

Page: 2 / 12

GB-2

Checking the usage

PFA 700

Fieldbus interface for interworking of up to nine automatic
burner control units PFU 760 or PFU 780 to industrial com-
munication networks using PROFIBUS DP. The PFA 700
can be plugged into the pre-wired module subrack BGT
SA-9U/1DP, together with the automatic burner control
units.

PFA 70

Fieldbus interface for interworking of up to eight automatic
burner control units PFU 780 to industrial communica-
tion networks using PROFIBUS DP. The PFA 710 can
be plugged into the pre-wired module subrack BGT SA-
8U/1DP, together with the automatic burner control units.

PFA 700, PFA 70

This function is only guaranteed when used within the

specified limits – see page 7 (Technical data). Any
other use is considered as non-compliant.

Type code

Code

Description

PFA

Fieldbus interface

700

70

For connecting:

PFU 760

PFU 780

Mains voltage: 220/240 V AC

110/120 V AC

Special version

Part designations



LED display for program status and error messages



Reset/Information button



On/Off button

Type label

Connection for opto-adapter

Screws for attachment to the subrack

Code switches for address setting

CD with device master data (GSD file)

Input voltage and ambient temperature – see type label.

PFA 700

BGT SA-9U/DP

Pre-wired module subrack for a fieldbus interface PFA 700
with nine further slots for automatic burner control units
PFU 760 or PFU 780.

BGT SA-8U/DP

Pre-wired module subrack for a fieldbus interface PFA 710
with eight further slots for automatic burner control units
PFU 780.

BGT SA-9U/DP, BGT SA-8U/DP

This function is only guaranteed when used within the

specified limits – see page 7 (Technical data). Any
other use is considered as non-compliant.

Type code

Code

Description

BGT

19" module subrack

For PFA and PFU

-9U

-8U

Slots: 9 × for PFU

8 × for PFU

/DP

1 PFA with PROFIBUS DP

Part designations



Perforated plate



Fieldbus interface PFA 700/PFA 710



Type label

Input and output voltage, enclosure and ambient tempera-
ture – see type label.

BGT SA

Summary of Contents for BGT SA-8U/1DP













Search results

Summary of Contents for BGT SA-8U/1DP

Reviews:

Related manuals for BGT SA-8U/1DP

Brands by name

Popular brands

Kromschroder BGT SA-8U/1DP, Operating Instructions Manual

Search results

Summary of Contents for BGT SA-8U/1DP

Reviews:

Related manuals for BGT SA-8U/1DP

Brands by name

Popular brands