EN
page 34
2.4
Rinse aid use
The machine has a standard rinse aid dispenser. The machine automatically sucks the
product.
The rinse-aid chemical, shall be suitable for professional glass and dishwashers and must
comply with the EN 60335-2-58/A11 norms.
The recommended amount is 3-6 cm of product measured on the suction hose.
1 cm of the product drawn into the hose is equal to about 0.13g. A correct amount of rinse
aid is very important for a quick and proper drying.
NB:
Excessive amount of chemicals or foam will reduce wash pump effi ciency.
Should the detergent lack, the display will show
"RINSE-AID LEVEL"
(only with optional
"Sensor for Chemicals Low Level").
2.3
Detergent use
The machine can be equipped with the detergent dispenser. If provided, the machine will
automatically take the needed detergent amount
The detergent shall be the NO FOAM type, suitable for industrial dishwashers and must
comply with the EN 60335-2-58/A11 norms.
The use of good quality liquid detergents is recommended.
Follow the manufacturer’s recommendations for chemical dosage, related to the local water
hardness. 1cm. of the product drawn into the tube is equal to about 0.15 g. A correct amount
of detergent is very important for a successful wash.
Should the detergent lack, the display will show
"DETERGENT LEVEL"
(only with optional
"Sensor for Chemicals Low Level").
RINSE-AID
OFF
57 C
85 C
CYCLE 1 (3 MIN)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
CYCLE SELECTION
boiler
TANK
OFF
57 C
85 C
CYCLE 1 (3 MIN)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
CYCLE SELECTION
BOILER
TANK
2.5
Drain pump system (optional)
The machine can be equipped with discharge pump.
Press the key
"E"
till the display will show
"DRAIN THE SUMP"
.
The Drain pump will automatically drain the wash-tank.
During the drain process, the button
"A"
will light in blue and will be fl ashing.
DETERGENT
detergent level
rinse aid level
Summary of Contents for KP202E
Page 4: ......
