EN
page 32
On the
"G"
display the
"STAND-BY"
message will be off.
The button
“A”
will light in white for a few seconds, while loading the software. After
loading is complete, the button will light in red.
At this moment, the water filling starts. The display
"
G
"
will read
"
FILLING WATER
".
Check the proper positioning of the overflow pipe.
Once the filling is done, the heating phase will start On the “G” display will appear the
reading
“
HEATING
”.
.”.
The reading will stay until both boiler and wash-tank will reach
the set temperatures. During this process, the machine will not allow any cycle selection
or start
After the filling/heating is completed, the key “A” and the display “G” will turn green.
If the machine is in standard configuration, with hot water in-feed (50°C), with no extra
power, the
“A”
button will light in green after some 20 min.
2.2.2
Operation
• Insert the rack filled with objects to wash.
• Select the desired wash program by the keys
“C”
and
“D”
or by keeping pressed the
“A” key.
Release the key when the selected program is selected.
To start the selected cycle press the
“A”
key.
The “A” key and the
“G”
display will turn blue.
• All wash-time long the display will read the wash-tank temperature and the boiler
OFF
57 C
85 C
CYCLE 1 (3 min)
CYCLE 2 (6 MIN)
CYCLE 3 (9 MIN)
CYCLE 4 (12 MIN)
CYCLE SELECTION
OFF
57 C
85 C
CYCLE 1 (3 MIN)
2 %
WASH
OFF
FILLING WATER
OFF
HEATING
temperature.
Below the temperatures indications line-bar is displayed to show the progression of the
wash-cycle.
At the end of the washing cycle, a hot rinse cycle will take place
A blue/green flashing on the button
"A"
will indicate the
"CYCLE ENDED".
boiler
TANK
BOILER
TANK
Summary of Contents for KP202E
Page 4: ......
