OPERATION
5
23
OPTIBRIDGE
www.krohne.com
07/2016 - 4004307801 - MA OPTIBRIDGE R01 en
When a device DTM is connected to the device DTM a window opens, that allows to set the
DTM-TAG and the slave address of the device DTM.
"DTM ID"
1
- This is the unique ID of the device DTM from the frame application.
It may vary among different frame applications.
"New DTM TAG"
2
- Set a new TAG for the device DTM.
"HART Address"
3
- This is the address of the device that the device DTM should communicate
with. This number is the polling address. The long address with device and manufacturer ID is
acquired from the device when the connection is established.
If you are not sure about the polling address of your device, start the topology scan. With this
function a list of connected devices with corresponding polling addresses will be listed.
Figure 5-4: Set device DTM Address
