SAFETY INSTRUCTIONS
1
5
OPTIBATCH 4011 C
www.krohne.com
11/2015 - 4000868403 - MA OPTIBATCH R03 en
Safety instructions
1.1 Intended use
This flowmeter has been specifically designed for the fast batching measurement of mass or
volume and is intended for use in filling machines or bespoke applications.
1.2 CE certification
This device conforms with the following EC directives:
•
EMC Directive 2004/108/EC
•
Low Voltage Directive 2006/95/EC
•
Pressure Equipment Directive 97/23/EC
The manufacturer declares conformity and the device carries the CE mark.
1.3 Associated documents
This handbook should be read in conjunction with relevant documents in relation to:
•
hazardous areas
•
communications
•
concentration
•
corrosion
1.4 Dirty gas
Dirty gas is gas that carries sand or other solid particles. Dirty gas causes excessive wear to the
primary measuring tube that can eventually result in complete tube failure. In some situations
tube failure where gas is being measured, can be very dangerous.
CE marking
DANGER!
If the meter is being used to measure gas and there is a risk that the gas might be dirty, you
must fit a filter upstream of the meter to catch solid particles.
MA_OPTIBATCH_en_151103_4000868403_R03.book Page 5 Tuesday, November 3, 2015 5:21 PM
