Wing assembly (wires and air tubing)
Front dowel modification
After fitting and fixing the wing half’s to the Fuselage. You may find there is some rear movement when
wing is Pulled back. This can cause the flap to touch the fuselage wing face.Replacing a 6mm thread to the front
dowel which is held in place with a thumb screw, will make sure that in flight.The wing will not move and lock the
flap up in flight.
Wires and air tubes can be rooted through the small tube that is installed at the front of the flap servo mounts.
The flap wire is rooted through this tube and across the retract bay and then though to the front of the wing
root.
6.
