Elevator and Rudder extension leads
After fitting the pipe it is time to start from the back of the Avanti, completing jobs through to the front.
(Always use high quality extension leads to handle any power loss in the long wire)
Use 3 1000mm extension lead for the elevators and rudder. Route cables round the back internal former and
down into the nice long groove and the bottom of the fuselage. Hold in place with cable tie. You can also sleeve
with heat resistant lagging if you want to. Also added protection, you can use 1/16 balsa sheet on the bottom of
the fuselage to completely seal the wires on the bottom. After making sure all wires are as far away from the
pipe as possible you can screw the pipe in and the back of the Avanti is complete.
11.
