Rev. Date: 12/14/10
Page 5
MODEL #5200-P
DECALS
Make Sure!
•
Hopper is empty of foreign objects
before
starting.
• Adequate electrical power is supplied or damage to unit will result.
• Machine must be on
before
adding fiber.
• Blower filter is kept clean and in place when blower is on.
• Machine is turned off
immediately
if hose is plugged, or blower will overheat.
• Blower must be on, when agitators are running, or machine will bind.
• Agitator motor is not run with hopper empty for more than a few minutes, or damage to seals will result.
• Sprockets, chains, belts and pulleys are correctly
aligned
and
tensioned
.
• Pieces of bag are
not
left in the machine as this can bind and stall your machine.
• This machine should only be used with good quality fibers that are dry, undamaged and that meet a
certain industry specification or quality standards.
IF THERE ARE ANY QUESTIONS WITH YOUR KRENDL MACHINE, DO NOT HESITATE TO
CONTACT US AT: 1-800-459-2069
General safety information intended to reduce the risk of serious
injury or death
Indicates which employee inspected equip-
ment and on what date.
Indicates that the electrical box on the ma-
chine is in compliance with UL codes.
Electrical maintenance information and schedule provided here.
Indicates if blower is off, on, or on with agitator.