34
Krell Showcase Processor
Using this screen, you can enable loudspeakers that are in your sys-
tem in the left column and select loudspeaker characteristics in the
far right column.
FULL RANGE
FULL RANGE
sends 20Hz to 20KHz signals to the loudspeaker.
LIMITED
sends information from the crossover frequency (see below) to
20KHz to the loudspeaker. The frequencies below the crossover fre-
quency are sent to the subwoofer if present; otherwise, these low fre-
quencies are sent to the full range loudspeakers in the system.
SUB
Select
NORMAL
or
ENHANCED
to choose the amount of bass information
sent to the subwoofer.
NORMAL
sends the low frequencies from the
limited speakers and the .1 (or LFE) signal to the subwoofer.
ENHANCED
sends additional bass information from the left and right
loudspeakers to the subwoofer in addition to the low frequencies
from the limited loudspeakers and the .1 (or LFE) signal.
CRSOVR
Crossover selections are 120, 100, 80, 60, and 40 Hz. The standard
crossover setting is 80 Hz. Choose the crossover frequency appropri-
ate for your loudspeakers. The frequencies below the crossover
frequency are sent to the subwoofer if a subwoofer is present; other-
wise, these low frequencies are sent to the full range loudspeakers in
the system.
5.1 SURR
Select
SURROUND, BACK,
or
BOTH
to choose which loudspeakers in a
6.1 or 7.1 system receive surround information when playing a Dolby
Digital 5.1 or DTS 5.1 encoded software.
SURROUND
sends surround
channel information to your surround loudspeakers only.
BACK
sends
surround channel information to your back loudspeakers only.
BOTH
sends surround channel information to your surround and back loud-
speakers simultaneously.
After selecting the appropriate loudspeaker configuration for your
system, press the previous key (74) twice to return to the main menu.
System Configuration,
continued
Speaker Setup Screen,
continued
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.
