28
Krell Showcase Processor
1. Connect the video source outputs to the appropriate video inputs
on the Showcase Processor.
2. Connect the video outputs of the Showcase Processor to the
inputs of your video monitor and/or video recorder.
Component video signals use three wires that convey luminance (Y),
red minus luminance [R – Y] (Pr), and blue minus luminance
[B – Y] (Pb) signals.
Use the component connection when the source device (DVD) and
output device (TV) both feature component connections. See the
user manuals included with these devices for more information.
The Showcase Processor is also equipped with four S-video inputs
(43) and four composite video inputs (45). S-video cables transmit
the color and luminance components of the video signal separately.
The Showcase Processor is equipped with two S-video outputs (42),
two composite video outputs (44), and one set of component video
outputs. One S-video output, one composite video output, and the
component video output include on-screen display (OSD). For dub-
bing purposes, only the S-video and composite outputs labeled OSD
display on screen information.
S-video inputs can be seen only on S-video outputs. The same is true for
composite and component video signals.
The Showcase Processor has balanced outputs with XLR connec-
tors and single-ended outputs with RCA connectors. Both outputs are
active at all times, allowing simultaneous connection to separate
amplifiers. Only one of these output formats should be connected to
a single amplifier.
1. Connect the outputs of the Showcase Processor to the input(s) of
your power amplifier(s).
2. Connect source devices to the appropriate inputs on the back
panel.
3. Connect the AC power cord to the IEC connector (52) on the
Showcase Processor and to the AC wall receptacle.
Connecting the Showcase Processor to Your System,
continued
Note
Next:
Connect Video
Sources
Last:
Connect Amplifiers
and Sources
