This product is manufactured in the United States of America. Krell
®
is a registered trademark of Krell
Industries, Inc., and is restricted for use by Krell Industries, Inc., its subsidiaries, and authorized agents. All
other trademarks and tradenames are registered to their respective companies.
Reference KPE
Standard KPE
Phono Preamplifiers
v 02.1
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
TEL 203-799-9954
FAX 203-891-2028
E-MAIL [email protected]
WEBSITE http://www.krellonline.com
This product complies with the EMC directive (89/336/EEC) and the low-voltage
directive (73/23/EEC).
©
2002 by Krell Industries, Inc. All rights reserved
P/N 306104
The preamplifier must be placed on a firm, level surface where it is not exposed to
dripping or splashing.
The ventilation grids on the top of the preamplifier and the space underneath the
preamplifier must be unobstructed at all times during operation. Do not place flam-
mable material above or beneath the preamplifier.
Before making connections to the preamplifier, ensure that the power is off and other
components are in mute or stand-by mode. Make sure all cable terminations are of
the highest quality, free from frayed ends, short circuits, or cold solder joints.
THERE ARE NO USER SERVICEABLE PARTS INSIDE THE PREAMPLIFIER
Please contact your authorized Krell dealer, distributor, or Krell if you have any
questions not addressed in this manual.
CONTACT
INFORMATION
WARNINGS
