Krell Home Theater Standard 7.1
73
Operating the Home Theater Standard 7.1,
continued
Play Both Zones
With the Home Theater Standard 7.1 in the stand-by mode:
1. Press and release the power pre key (58) until the blue power
LED illuminates.
2. Press the input device selection button or key for the source you
wish to play.
3. Begin playing the source and adjust the volume to your liking.
4. Press the Z2 key (60).
5. Press the input device selection button or key for another source
to play in zone 2. Or select the same input device button if you
want the same source to play in both zones.
6. Begin playing the source and adjust the volume to your liking.
7. Press the power pre key again to turn off zone 2.
8. Press the Z2 key and the power pre key again to turn off the
main zone.
With the Home Theater Standard 7.1 in the stand-by mode:
1. Press the power pre key (58) to activate the main zone.
2. Select the source you wish to play.
3. Press power pre key again to turn off the main zone.
With the Home Theater Standard 7.1 in the stand-by mode:
1. Press the Z2 key (60) to activate zone 2.
2. Select the source you wish to play; it will play only in zone 2.
3. Press the Z2 key again to turn off zone 2.
For additional remote control options, see RS-232 Port: Sending
Commands and Interpreting Data, the developer’s reference for
the Home Theater Standard 7.1.
Play Either Zone
MAIN ZONE
ZONE 2
