30
Krell Home Theater Standard 7.1
Connecting the Home Theater Standard 7.1
to Your System,
continued
EXAMPLE 3: You want to use an s-video connection with a
VCR device and you reside in Europe.
Connect the VCR device to the Home Theater Standard 7.1 and con-
nect the Home Theater Standard 7.1 to the PAL Interlaced video
monitor using s-video (OSD) connections. Since Figure 5 shows that
the factory default for the VCR is s-video, you do not need to change
the signal in the configuration menu.
EXAMPLE 4: You want to use an s-video connection with a
satellite device using a PAL monitor. You reside in Europe.
Connect the satellite device to the Home Theater Standard 7.1
and connect the Home Theater Standard 7.1 to the PAL monitor
using s-video (OSD) connections. The satellite device factory default
signal is s-video 1/NTSC Interlaced. See Figure 5.
The VCR device factory default signal is s-video 2 and the factory
default format for the VCR is PAL. See Figure 5. To change the
satellite device signal and monitor format, first activate the VCR
device by pressing the VCR button (8) on the front panel or the VCR
key (69) on the remote control.The VCR device LED illuminates.
Access the configuration menu of the Home Theater Standard 7.1
via the remote control menu key (82) and navigate to the
CONFIGURE
DEVICES
menu screen. Select
CONFIGURE VIDEO
and go to the
ASSIGN
VIDEO INPUT
screen. Select the satellite device, change the satellite
signal to
S-VIDEO 2,
and change the satellite format to
PAL.
Step 6: Activating the On
Screen Display (OSD),
continued
Video Source Connection
Scenarios,
continued
