52
Krell Home Theater Standard 7.1
Use the direction keys (81) to select the anti-clip option you want (
ON
or
OFF
) and the input gain decibel level.
ON
The anti-clip function measures the signal level and prevents the input
signal from overloading (clipping) the analog-to-digital converters.
OFF
Disengages the anti-clip function.
Boost weaker signals by increasing the input gain value. Use the
direction and enter keys to select the number of dB.
To maximize your system’s signal-to-noise ratio without clipping,
increase the input gain value applied to the signal until you see the
clip indicator illuminate on the screen; then back the input gain value
off 1 dB. The optimal signal gain value will vary from source to source.
After selecting the anti-clip and input gain options for your analog
devices, press the previous key (80) once to return to the
CONFIGURE
LEVELS
menu.
System Configuration,
continued
ANTI-CLIP
INPUT GAIN
Use the
ANALOG INPUT TRIM
menu to measure the level of an analog
input source to the Home Theater Standard 7.1.
Select
ANALOG INPUT TRIM
from the
CONFIGURE LEVELS
menu. The
ANALOG
INPUT TRIM
screen appears:
Analog Input Trim
KRELL HTS
-ANALOG INPUT TRIM-
CLIP INDICATOR
ANTI-CLIP
INPUT GAIN
LEFT
RIGHT
ON
0
DB
Analog Input Trim Screen
How To Navigate the Menu
and Make a Selection
1. Use the direction keys to scroll
from line to line.
2. Press enter to select a line.
3. Use the direction keys to scroll
through options within a line.
4. Press enter to select and set
an option.
5. Use the direction keys to scroll
to the next line.
