SETUP
Trim the Anti-Chip Strip
(
1
) Loosen the cut-depth stop knob, slide the
stop to align the pointer with the ¼” mark,
and tighten the knob.
(
4
) Set the blade mode to Cut.
1
(
2
) Place the guide track on a scrap
workpiece at least 62” [158cm] long and
1” [25mm] wider than the guide track.
Position the saw on the guide track with
both tracking controllers engaged.
(
3
) Loosen the splinter guard screw with the
small hex wrench stored in the forward
grip and raise it to the full-up position.
2
3
4
Summary of Contents for ADAPTIVE CUTTING SYSTEM
Page 79: ...NOTES REMARQUES NOTAS ...
