Optional Accessories
Kreg Track Clamps (Sold Separately)
These clamps slide into notches in the starter block and T-slots in the track
to allow the track to be clamped to the workpiece. They are recommended
when cutting materials with slippery surfaces, such as melamine-coated
particleboard, when the entire length of the track is not fully supported by
the workpiece, or when making cuts with a single section of track.
!
WARNING
Before using the Accu-Cut™, read, understand, and follow the safety warnings and operation instructions
included with this product and provided by your saw manufacturer. Keep all tool guards and safety devices in place. Do not attempt
a cut when any part of the Accu-Cut™ interferes with the operation of the saw blade guard. Always wear eye and ear protection.
Use respiratory protection in dusty conditions. Disconnect the saw from power supply before making any adjustments to the
Accu-Cut™ or the saw.
Replacements
Replacement Guide Strips
Are also available for purchase. See www.kregtool.com or contact
customer service to purchase.
