Authorised Kreepy Krauly Accessories
13
VTX-C pulsates rapidly
but doesn’t move, or travels
very slowly:
• Check that the sole is fitted correctly.
• Check if the sole tread is worn
away, replace it with a new sole.
• Check that the Vacuum Plate and
Smart-Skim (see page 7) or Auto
Skim valve are fitted correctly.
• Check the markings on the seal to
make sure it hasn’t been installed
upside down.
• Check the Smart-Skim or Auto
Skim valve isn’t jammed. If it is,
remove the valve from the vacuum
plate, submerge the valve in
water – opening and closing until
it moves freely.
• Check Smart-Skim spring is
correctly attached.
• Check for a blockage in the main
body of your VTX-C (see page 19).
VTX-C travels too slowly,
or doesn’t pulsate:
• Check if the filter is blocked.
Backwash or clean it thoroughly,
if required.
• Check if the flow valve at the
bottom of your VTX-C is blocked,
clean out the valve (see page 17).
• Check if the pump or skimmer box
strainer basket is full or blocked,
clean them out.
• Check if the main drain valve is
open, shut it off, or fit an optional
expanding plug.
• Check for damage to the main body.
Troubleshooting
