Krautzberger 200-0151, Operating Instructions Manual

Page: 26 / 44

7.3 Changing the air and fluid nozzles
Removing the nozzles
1. Clean automatic spray gun ( Ä Chapter 7.2 ‘Cleaning spray guns’ on page 25 )
Fig. 10: Changing the nozzles
2.
WARNING!
The closing piece (Fig. 10/5) is under spring force!
Carefully unscrew the closing piece (Fig. 10/5).
3. Loosen clamping nut (Fig. 10/1).
4. Remove the air nozzle (Fig. 10/2).
5. Unscrew fluid nozzle (Fig. 10/3).
Always change the fluid nozzle (Fig. 10/3) and fluid needle (Fig. 10/4) at the same time
(
Ä Chapter 7.4 ‘Changing the fluid needle’ on page 27).
Attaching the nozzles
1. Tighten the fluid nozzle (Fig. 10/3).
2. Attach the air nozzle (Fig. 10/2) and tighten it with the clamping nut (Fig. 10/1).
3. Screw on the closing piece (Fig. 10/5).
Operating instructions
T-Dok-144-GB-Rev.1
mail@krautzberger.com, www.krautzberger.com GB–26