Krautzberger 090-3566, Operating Instructions Manual

Page: 17 / 61

6 Installation
6.1 Safety
Personnel:
n Specialised personnel
Protective equipment:
The selection of the protective equipment depends on the installation conditions on site. Always
observe the applicable country-specific safety, accident prevention, occupational safety, and envi-
ronmental protection regulations for the proper selection of the protective equipment.
WARNING!
Risk of injury due to improper installation!
Improper installation may cause serious personal injury or material damage.
Note:
– Ensure ample of space for the installation prior to starting any work.
– Carefully handle open, sharp-edged components.
– Maintain order and cleanliness at the installation site. Components that are loosely
stacked or are scattered around can cause accidents.
– Assemble components properly. Adhere to specified screw tightening torque.
– Secure components against tipping or falling.
– Ensure that the utilised hose lines meet the requirements for pressure, chemical and
mechanical loads. At the same time, adhere to the spray media manufacturer's specifica-
tions in the safety data sheet.
6.2 General installation information
Adhere to the following general information for the installation:
n Only carry out the installation and start of operation according to the steps described in this
operating manual.
n Make sure that the utilised hose lines meet the requirements for pressure, chemical and
mechanical loads.
n Mixing up the air or fluid connections can lead to permanent damage to the spray gun.
n Reduce the supply air through the installation of a pressure regulator to a maximum of 6 bar.
n Make sure that the connected compressed air is oil-free and free of solid matter.
n Operate the spray gun with processed, dried compressed air (air quality pursuant to DIN ISO
8573-1: grade 4).
n Never point the compressed air at living beings.
Hand-held Spray Gun Mignon 3
ENGLISH
200-0137 ￭ 200-0138 ￭ 200-0187 ￭ 090-3566 ￭ 200-0155 ￭ 200-0156 GB–17