KRAUSMANN U63020-00B, Operation Manual, Page: 22 / 24

22
U63020-00B KRAUSMANN POWER TOOLS
English | EN
In case there is a need for a repair after the war-
ranty period has expired, we will provide the best
possible attention to repair the tool successfully.
7. Repair / Servicing
Do not dispose of electrical
machines as unsorted municipal
waste, use separate collection
facilities.
Contact your local government
collection systems for informa-
tion regarding the collection systems available.
I f electrical machines are disposed of in landfills
or dumps, hazardous substances can leak into
the groundwater and get into the food chain,
damaging your health and well-being. When
replacing old machines with new ones, the retailer
will be happy to take back your old machine for
disposal.
8. Disposal
9. Declaration of Conformity
Herewith declares that:
T he Cordless Reciprocating Saw with CODE:
U63020-00B and distinctive title: RS10BL-1200 un-
der the brand KRAUSMANN
(Description: Cordless
Reciprocating, 20V, 230V~50Hz, SPM: 0-3000spm, stroke
length: 28mm, capacity in wood: 150mm, capacity in soft
metal: 10mm, tool-less blade change, electronic current
limiter for overload protection, LED light, ergonomic soft
grip, in color box packaging),
is designed in conformity
with provision of the Directives 2006/42/EC and
the following manufacturing standards: EN60745-
1:2009+A11:2010, EN60745-2-6:2010.
Year in which “CE” marking was affixed: 2020
Date: July 29th, 2020
PAPADEAS S.A.
4-6 Iroon 1912 St., 13671, Acharne, Greece
Authorized Representative
* Accessories and contents may change from the production
factory without any warnings, in that case the company bears
no responsibility.
The tool has been used properly and for the
purpose for which it was purchased.
T he tool presents a problem that is due to
faulty material and manufacturing.
I ncapability of the tool to perform according
to the technical specs provided.
Damages are not covered by the warranty that are
due to causes such as:
W ear due to improper use.
P artial or total disassembly.The tool’s shell
must be disassembled only by personnel
authorised by the official distributor.
Damage due to overloading.
Usage of incorrect or incompatible accessory.
B ad maintenance from the operator or any
other third party.
W ear that was induced by external factors or
rogue particles (dust, debris etc.)
W ear due to non compliance with the instruc-
tions in this manual.
I f, during the warranty period, there is a fault that
can not be repaired from the authorised service
department, the tool will be replaced without any
extra cost.