KRAUSMANN U63020-00B, Operation Manual, Page: 19 / 24

19
KRAUSMANN POWER TOOLS U63020-00B
English | EN
Unlike simple engines that contain carbon brushes, the
KRAUSMANN® BRUSHLESS engine eliminates this waste of
energy that carbon brushes need to produce friction. This
increases autonomy, performance and service life of the
tool, making it ideal for heavy-duty work.
When selecting a blade, choose the right type
and length. Many types of blades are available
for a variety of applications: cutting metal, wood,
nail-embedded wood, scroll cutting, roughing-in
and contours.
M any lengths are also available. Choose a length
long enough to extend beyond the shoe and your
work throughout the stroke. Do not use blades
less than 88mm long since they won’t extend
beyond the shoe throughout the stroke.
Selecting a blade
B
Remove battery pack before changing blades.
Make sure the spindle and blade clamp 3 areas are
clean. Metal chips and sawdust may prevent the
Blade Clamp from clamping securely.
Depending on the job, the blade may be inserted
with the teeth facing up or down. To install a blade,
always make sure that the blade clamp lever Α (fig
1) is in released position (fig 2) before inserting the
recipro saw blade. If the blade clamp lever in fixed
position (εικ 2), rotate the blade clamp lever in the
direction of the arrow B so that it can be locked at
the released positon.
Installing and removing blades from
the blade clamp
fig 1
fig 2
A. Blade clamp lever, B. Αrrow
Released position Fixed position
Insert the blade into the blade clamp 3 as far as it
will go. The blade clamp sleeve rotates and fixes
the recipro saw blade. Make sure that the recipro
saw blade cannot be extracted even though you
try to pull it out.
To remove the blade, rotate the blade clamp lever
Α in the opposite direction of the arrow B fully.
The blade is removed and the blade clamp lever is
fixed at the fixed position.
If you remove the recipro saw blade without
rotating the blade clamp lever fully, the lever may
not be locked in the released position. In this
case, rotate the blade clamp lever fully again,then
make sure that the blade clamp lever locked at the
released position.
I f the blade clamp lever is positioned inside the
tool, switch on the tool just a second to let the
blade out. Remove the battery cartridge from the
tool before installing or removing the recipro saw
blade.
WARNING:
If you do not insert the blade deep enough, the recipro
saw blade may be ejected unexpectedly during operation.
This can be extremely dangerous.
WARNING:
Κeep hands and fingers away from the lever during the
switching operation. Failure to do so may cause personal
injuries.
Periodically clean dust and debris from the
Blade Clamp with dry compressed air.
I f the collar resists twisting, twist the collar
back and forth to shake debris loose.
Blade Clamp Maintenance