KRAUSMANN U63020-00B, Operation Manual, Page: 17 / 24

17
KRAUSMANN POWER TOOLS U63020-00B
English | EN
failure.
Do not place batteries in a tool box or pock-
et with nails, screws, keys, etc. Fire or injury
may result.
Have your power tool serviced by a
qualified repair person using only genuine
replacement parts. This will ensure that the
safety of the power tool is maintained.
Follow instruction for lubricating and chang-
ing accessories.
K eep handles dry, clean and free from oil
and grease.
Service
3. Specific safety regulations
The KRAUSMANN
®
UN1 POWER 20V
battery can be used with all 20V
power tools bearing this marking.
5
6
2
3
4
Wear ear protectors. Exposure to noise can
cause hearing loss.
Use auxiliary handles if supplied with the tool.
Loss of control can cause personal injury.
Hold power tools by insulated gripping sur-
faces when performing an operation where
the cutting tool may contact hidden wiring
or its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
W ear a hard hat (safety helmet), safety
glasses and/or face shield. Ordinary eye or
sun glasses are NOT safety glasses. It is also
highly recommended that you wear a dust
mask and thickly padded gloves.
Βe sure the attachment is secured in place
before operation.
Under normal operation, the tool is designed
to produce vibration. The screws can
come loose easily, causing a breakdown or
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to electric power tools’ safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1
15
16
17
18
19
20
accident. Check tightness of screws carefully
before operation.
I n cold weather or when the tool has not
been used for a long time, let the tool warm
up for a while by operating it under no load.
This will loosen up the lubrication.
Always be sure you have a firm footing. Be
sure no one is below when using the tool in
high locations.
Hold the tool firmly with both hands.
Κeep hands away from moving parts.
Do not leave the tool running. Operate the
tool only when hand-held.
Do not point the tool at any one in the area
when operating. Parts could fly out and injure
somenone seriously.
Do not touch parts close to the attachment
immediately after operation; they may be
extremely hot and could burn your skin.
S ome material contains chemicals which
may be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
B efore replacing the attachments, disconnect
the device from the power source.
T ake a break when you feel vibration-related
discomfort.
Hold the device firmly to reduce the vibration
level.
I f the vibration or noise is excessive, or the
device emits unusual noise, return the device
for servicing.
T he device produces noise, which may cause
hearing impairment. You can avoid such inju-
ry by wearing ear protectors and take a break
when you feel noise-related discomfort.
Never wrap the device in cloth or other
material to suppress noise. Such covering will
hinder proper ventilation of the device. In this
situation, heat generated by the device can
result in fire or cause burns.
10
11
12
14
13
7
8
9
Additional safety regulations for
reciprocating saws
Keep hands away from the sawing range. Do
not reach under the workpiece. Contact with
the blade can lead to injuries.