![background image](http://html.mh-extra.com/html/krausmann/9005/9005_operation-manual_2003101016.webp)
16
9005
KRAUSMANN POWER TOOLS
4
2
4
11
10
10
11
WARNING:
Remove the plug from the power source before installing
or removing sandpaper.
Installing a sanding paper
ON/OFF trigger switch
Lock-on button
Firmly press the sanding paper
11
onto the
hook & loop pad
10
(fig 1).
To remove the sanding paper
11
, simply peel it
away from the hook & loop pad
10
(fig 2).
To turn the sander ON, squeeze the trigger switch
4
(fig 3). To turn the sander OFF, release the trigger
switch.
Your sander is equipped with a lock-on feature,
which is convenient when continuously sanding
for extended periods of time is required.
To lock the switch ON, depress the trigger switch
4
, push in and hold the lock-on button
2
located at
the left side of the handle, then release the trigger.
Release the lock-on button and your sander will
continue running. To turn the sander OFF, depress
and release the trigger switch to release the lock-
on button (fig 4).
fig 1
NOTE:
Place the sanding paper so the holes in the paper line up
with the matching holes in the hook & loop pad.
NOTE:
Press the sanding paper firmly onto the hook & loop pad.
i
i
English |
EN
fig 2
fig 3
fig 4
WARNING:
F
or safety reasons, the operator must read this Owner’s
Manual before using this sander.
Verify the following every time the sander is used:
1. Sandpaper is in good condition and properly installed
on the sander.
2. The workpiece is properly secured and free from any
foreign objects.
3. Safety glasses, safety goggles, or face shield is being
worn.
4. Hearing protection and dust mask are being worn.
Failure to adhere to these safety rules can greatly increase
the chances of serious injury.