www.kraun.it
27
Quick Guide
6) Rfc2364Vpi1, Rfc2364Vpi2 -- These are different values of
the VPIs that user wants to configure for PPP interfaces.
7) Rfc2364Vci1, Rfc2364Vci2 -- These are different values of
the VCIs that user wants to configure for PPP interfaces cor-
responding to above mentioned VPIs.
Note:
Please note that the VPIs/VCIs of the PVCs should not
be conflicting with each other else the driver loading will fail.
5.3.4 Verification of driver loading successfully
To determine if the driver has loaded:
% dmesg (or file /var/log/messages)
gp: USB Modem Driver Build
To determine if driver is in data mode.
% dmesg (or file /var/log/messages)
gp: Link established (8000/892)
^^^^ ^^^
^ ^
^ Upstream rate
Downstream rate
Alternatively the control panel application can also be used to
get Modem Status as given below.
% gsi_cfg eth2 –s
(The ethernet device depends on what has been configured on
the system)
(Command to be executed from monaco_linux/cpl)
