www.kraun.it
26
Quick Guide
Issuing this command will create 4 ethernet interfaces and
2 PVC for PPPOA interfaces. (Combination of Rfc1483Vpi1
and Rfc1483Vci1 will be the first interface, Rfc1483Vpi2 and
Rfc1483Vci2 will be 2nd interface and so on).
The details of various options used in command above is as
below:
1) PVCCount - This indicates the number of PVCs user wants
to configure for ethernet interfaces. Maximum value for
this variable in this release is 4 and hence can have any
walue between 1 and 4, any value above 4 and below 1 is
invalid and driver loading will fail.
2) PPPOACount - This indicates the number of PVCs user wants
to configure for PPPOA interfaces. Maximum value for this
variable in this release is 4 and hence can have any walue
between 1 and 4, any value above 4 and below 1 is invalid
and driver loading will fail.
3) Rfc1483Vpi1, Rfc1483Vpi2, Rfc1483Vpi3, Rfc1483Vpi4 --
These are 4 different values of the VPIs that user wants to
configure.
4) Rfc1483Vci1, Rfc1483Vci2, Rfc1483Vci3, Rfc1483Vci4 --
These are 4 different values of the VCIs that user wants to
configure.
5) Rfc1483Mode defines the mode for which the PVC is op-
erating. In this release this value of Rfc1483Mode remains
same for all the PVCs which are being created. Thus all VCs
using rfc1483 encapsulation will be created using same en-
capsulation type.
