7
Manual
www.kraun.it
2.1.2 Back Panel
Kraun “ADSL2/2+ Wireless-N Router 150Mbps plus” Back Panel
ON/OFF:
Power Switch. Press it in to turn on the power and press it out to turn off the power.
WPS/RESET:
Hold and press it for 1 second to connect WPS, and 7 seconds to bring all settings back
to factory defaults.
Note:
Please use the supplied power adapter, for use of an unmatched power adapter
may damage the device.
LAN1/2/3/4:
LAN network cable interface. It is used to connect Hub, Switch, or computer in a LAN.
(When the access way is changed into community broadband, LAN4 can be used as the
wireless Router’s WAN port.)
DSL:
RJ11 interface for telephone line connection (It does not function when the device is
configured to use Ethernet uplink mode as access mode).
2.2 Hardware Connection
• Follow the diagram below to connect your network devices when using DSL uplink access
mode (through telephone line).
• Follow the diagram below to connect your network devices when using Ethernet uplink
access mode (through network cable).
MODEM
MODEM
