18
Manual
www.kraun.it
1. In DSL mode, you are required to configure parameters for ATM interface.
To enter the ATM Interface page, click “Advanced Setup”---“Connection Mode” (Select DSL mode
and click “Apply”) --- “WAN Service”---ATM Interface. And then click “Add” to configure the rel-
evant parameters.
On this page, you can configure VPI and VCI values (consult your local ISP if you are not clear). For
other options, keep the defaults and click the “Apply/Save” button.
2. In Ethernet modes, you are required to configure parameters for Ethernet interface.
To enter the ETH Interface page, click “Advanced Setup”---“Connection Mode” (Select Ethernet
mode and click “Apply”) --- “WAN Service”---“ETH Interface”. And then click the “Add” button to
configure relevant parameters.
