53
Manual
www.kraun.it
Click “Add” to enter the following screen to add rules.
Name:
The name of the configured rule.
Enable:
Enable/Disable the rule.
Interface:
The interface that needs to configure priority. Precedence: Set a priority for the selected
interface.
Click “Save/Apply” to save the settings.
4.2.11 Routing
Default Gateway
Gateway is the path for sending packets when your computer is communicating with computers on
other networks. When there are multiple WAN connections, the gateway must be specified, oth-
erwise, your computer may not be able to communicate with computers on other networks. When
there is only one WAN connection, just keep the default settings.
Click “Advanced Setup”-> “Routing”-> “Default Gateway” to enter the screen below.
Available Routed WAN Interfaces:
Current existed WAN connection.
Selected Default Gateway Interfaces:
WAN connection has already been selected as the gateway.
Select the WAN connection that you want to set as the gateway and click “Apply/Save” to save the
settings. The settings will be effective after the system reboot.
