Max tool
load
< 0.9 kg
< 1.35 kg
< 2 kg
< 2.25 kg
< 5 kg
< 10 kg
< 20 kg
< 80 kg
Reference of
the suitable
lanyard
TS 90 001 09
TS 90 001 11
TS 90 001 12
TS 90 001 10
TS 90 001 03
TS 90 001 04
+
TS 90 001 05
TS 90 001 13
TS 90 001 00
TS 90 001 06
TS 90 001 08
TS 90 001 02
(2x5kg)
TS 90 001 01
TS 90 001 08
TS 90 001 04
TS 90 001 14
TS 90 001 07
We created two kits: TS 90 100 00 (11 parts) and TS 90 101 00 (7 parts), consisting of a selection of the above accessories and
lanyards, to facilitate your choice.
For more information on the implementation of each reference, see the complete guide of S-TS accessories
and/or lanyards.
3) Choosing the anchor point:
•
This may be a tool attachment ring on the user's belt, harness, etc. In the range of KRATOS SAFETY harnesses, they
are identified with an orange colour and the following code:
This may also be the TS 90 001 04 removable ‘D’ ring which can be installed on a harness or belt, or the TS 90 001 14 connector
which can be installed on a belt strap (horizontal).
• Item TS 90 001 03 is installed on the user's wrist, so the wrist serves as the anchor point!
• Tool lanyard TS 90 001 06 can also be attached directly to an anchor structure.
Always check the hook-and-loop closures fasten properly, as they guarantee that the bracelet stays
closed and holds if the tool is dropped.
Always check the connectors are closed and locked.
WARNING: Whatever combination you use, make sure that it does not interfere with the safe use of your tool.
After use, clean your S-Tools Systems accessories and keep them away from light, any source of heat, moisture, solvents, and any
sharp edges that may affect their performance.
Inspection: A visual inspection is essential before using the S-Tools Systems accessories.
Before using your S-Tools Systems accessories, make sure they show no signs of cuts, wear, discolouration, deformation, corrosion,
etc. When in doubt, they should be discarded.
Do not use S-Tools Systems accessories beyond their weight limit.
Always check the connection to the tool before use.
S-Tools Systems accessories used to arrest a falling tool should be taken out of service.
5
Summary of Contents for TS 90 001 00
Page 14: ...NOTES 14 ...
Page 15: ...NOTES 15 ...
