EN
EN - 1
TECHNICAL
SPECIFICATIONS
Voltage ..................................See data plate
Motor power .....................................1100 W
Sound level ....................................59 dB(A)
Negative pressure .................... 250 mmH
2
O
Paper bag capacity ................................ 12 l
Dimensions ...............350 x 400 x 375H mm
Weight ................................................... 7 kg
Accessories ................................... Ø 32 mm
TYPE OF USE
Use this appliance only as a dry vacuum
cleaner to suck up dust, crumbs etc.
It has only been designed for this use.
DANGER:
The manufacturer can not be held respon-
sible for any damage due to improper or
incorrect use.
Any other use releases the manufacturer
from liability for harm to persons and/or
property and invalidates any warranty
condition.
IMPROPER USE
Do not use the appliance to:
- Suck up liquids of any kind;
- Suck up flammable, explosive, corrosive
and/or toxic substances.
- Suck up hot substances.
Do not use the appliance in areas at risk of
explosion.
PREPARING
THE APPLIANCE
Checking the filter systems
- Move the lever (1 Fig. 1) and remove the
cover (2 Fig. 1).
- Check that the paper bag (3 Fig. 2) is as-
sembled inside the appliance.
- If the paper bag (3 Fig. 2) is not present,
assemble it by inserting the square card-
board stiffener into the slot on the drum.
- Replace the cover (2 Fig. 3), inserting the
slot (4 Fig. 3) on the cover in the tab (5
Fig. 4) on the drum, then push it down
until you hear it click into place.
Assembling the piping
- Insert the sleeve with bayonet coupling
(6 Fig. 4) into the hole (7 Fig. 4) on the
drum, ensuring the arrow on the sleeve
(6 Fig. 4) coincides with the arrow (8 Fig.
4) on the coupling ring nut, then turn the
sleeve clockwise until it locks.
- Attach the hose extension (10 Fig. 5) to
the ergonomic handle (9 Fig. 5).
- Attach the required accessory (suction
tool, dusting brush, crevice tool, multi-
purpose brush etc.) to the extension (10
Fig. 6).
- There are slots on the back of the appli-
ance for positioning rigid extensions or
accessories.
Multi-purpose brush
The multi-purpose brush should be used as
follows:
- To clean hard floors, parquet etc.: press
the lever (11 Fig. 6) back to extract the
brush bristles.
- To vacuum on carpets, rugs etc.: press
the lever (11 Fig. 6) forwards to retract
the brush bristles.
Auxiliary power brush connection
The appliance is equipped with an auxiliary
power brush connection (optional).
- Lift the flap (12 Fig. 7) to access the con-
nection (13 Fig 7).