Kramer Electronics Ltd.
VS-88UHD – Using the Embedded Web Pages
38
To set the timeout:
1. In the Navigation pane, click
Timeout Settings
. The Timeout Settings page appears.
Figure 38: Timeout Settings Page
2. Set the specific output delay time.
If you do not want a specific output to shut down if an input signal is not detected, check the
Never
box next to the desired output.
3. Set audio support
ON
if you want shutdown to occur only if an audio signal is lost.
Support audio only
can be used if the video and audio signals routed to an output, come
from separate sources.
If
Support audio only
is set to:
ON
– The audio signal routed to the output remains active when the video source
(coming from a different input) is deactivated.
OFF
– The audio signal routed to the output is deactivated together with the
deactivation of the video source (coming from a different input).
To set the video lost timer (when in auto-switching mode):
1. In the Navigation pane, click
Timeout Settings
. The Timeout Settings page appears.
2. Set the video lost timer.
The adjustment sequence presented here is only an example. You can adjust the output
settings in any other order.
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: [email protected]
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.