![background image](http://html1.mh-extra.com/html/kramer/vs-88uhd/vs-88uhd_user-manual_2001458008.webp)
Kramer Electronics Ltd.
VS-88UHD – Installing in a Rack
6
Installing in a Rack
This section provides instructions for rack mounting the
VS-88UHD
. Before installing in a rack,
verify that the environment is within the recommended range:
Operation temperature – 0
to 40
C (32 to 104
F).
Storage temperature – -40
to +70
C (-40 to +158
F).
Humidity – 10% to 90%, RHL non-condensing.
When installing on a 19" rack, avoid hazards by taking care that:
It is located within recommended environmental conditions. Operating ambient
temperature of a closed or multi-unit rack assembly may exceed ambient room
temperature.
Once rack mounted, there is enough air still flow around the
VS-88UHD
.
The
VS-88UHD
is placed upright in the correct horizontal position.
You do not overload the circuit(s). When connecting the
VS-88UHD
to the supply
circuit, overloading the circuits may have a detrimental effect on overcurrent protection
and supply wiring. Refer to the appropriate nameplate ratings for information. For
example, for fuse replacement, see the value printed on the product label.
The
VS-88UHD
is earthed (grounded) and connected only to an electricity socket with
grounding. Pay particular attention when electricity is supplied indirectly (for example,
when the power cord is not plugged directly into the wall socket but to an extension
cable or power strip). Use only the supplied power cord.
To rack-mount the VS-88UHD:
1. Attach both ear brackets to the
VS-88UHD
:
Remove the screws from each side of the
VS-88UHD
(3 on each side), and replace them
through the ear brackets.
2. Place the ears of the
VS-88UHD
against the rack
rails and insert the appropriate screws (not provided)
through each of the four holes in the rack ears.
Some models, may feature built-in rack ears:
Detachable rack ears can be removed for desktop use.
Always mount the
VS-88UHD
in the rack before connecting any cables or power.
If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack
Adapters user manual for installation instructions available from our Web site
www.kramerav.com/downloads/VS-88UHD
Проконсультироваться
и
купить
данное
оборудование
вы
можете
в
компании
«
АНД
-
Системс
»
адрес
: 125480,
г
.
Москва
,
ул
.
Туристская
,
д
.33/1; site: https://andpro.ru
тел
: +7 (495) 545-4870 email: [email protected]
При
обращении
используйте
промокод
AND-PDF
и
получите
скидку
.