Kramer VS-88H2, Quick Start Manual

Page: 1 / 4

VS-88H2 Quick Start
P/N: 2 9 0 0 - 3 0 1 1 5 0 QS Rev: 1
Scan for full manual
VS-88H2 Quick Start Guide
This guide helps you install and use your VS-88H2 for the first time.
Go to www.kramerav.com/downloads/VS-88H2 to download the latest user manual and check if firmware
upgrades are available.
Step 1:
Check what’s in the box
VS-88H2 4K HDMI 8x8 Matrix Switcher
1 Quick start guide 1 Set of rack
ears
1 Power cord 4 Rubber feet
Step 2: Get to know your VS-88H2
# Feature Function
1 IN SELECTOR Buttons Press to select the input (1 to 8) to switch after selecting an output (also used for storing
machine setups in the STO-RCL modes and for selecting a pattern in the Pattern mode).
2 OUT SELECTOR Buttons Press to select an output (1 to 8) to which the input is routed. Also used for storing machine
presets.
3 MUTE/PATTERN Button Press to view the current pattern status and select the output/s to which a pattern is routed.
Press to mute audio or video on a selected output when D-AUDIO and/or VIDEO buttons are
pressed (lit).
4 ALL Button Press to perform an action on all outputs (for example setting Mute mode, Pattern mode and
so on).
For switching, press ALL and then a specific IN button to route the selected input to all
outputs. For example, press ALL and then IN 2 to route input 2 to all the outputs.
5 STO Button Press STO to store the current switching setting to a preset button.
6 RCL Button Press RCL to recall the switching setting from a preset button.
7 ARC For setting ARC mode on the inputs (see Step 6: Operate the VS-88H2 ).
8 D-AUDIO Button Press to enable digital audio routing. When pressed together with VIDEO, the digital audio is
routed together with the video signal.
9 VIDEO Button Press to select video inputs. When pressed together with D-AUDIO, video is switched
together with audio.
10 LOCK Button Press and hold to toggle between locking and releasing the front panel buttons.
Press to save the following setups: HDCP (On/Off), ARC, Fast Switch and Switch mode.
11 EDID Button For setting the EDID on the inputs (see Step 6: Operate the VS-88H2 ).
12 OUTPUT/INPUT
7-segment LED Display
Displays the selected inputs switched to the outputs (marked above each input).