#
Feature
Function
13
INPUT HDMI Connectors
Connect to HDMI sources (from 1 to 8).
14
OUTPUT HDMI Connectors
Connect to HDMI acceptors (from 1 to 8).
15
PROG Mini USB Port
Use for firmware upgrade or communication (connecting to a PC or a serial
controller).
16
SETUP DIP-Switches
N/A
17
5V/2A USB Port
Can be used to charge an external device.
18
RESET Button
Press and hold to reset settings to factory default values.
19
ETHERNET RJ-45 Port
Connect to your LAN.
20
OPTIONAL Terminal Block Connectors
N/A
21
RS-232
3-pin Terminal Block Connectors
Connect to a PC or a serial controller.
22
Mains Power Connector
Connect to the mains power.
23
Mains Power Fuse
Fuse for protecting the device.
24
Mains Power Switch
Switch for turning the device on or off.
Step 3: Install the VS-88H2
To rack mount the machine, attach both ear brackets (by removing the screws from each side of
the machine and replacing those screws through the `ear brackets) or attach the rubber feet and
place the machine on a table.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
VS-88H2
. For best results, we recommend that you
always use Kramer high-performance cables to connect AV equipment to the
VS-88H2
.
Step 5: Connect the power
Connect the power cord to
VS-88H2
and plug it into the mains electricity.
Safety Instructions (See
for updated safety information)