![background image](http://html1.mh-extra.com/html/kramer/vs-81hdxl/vs-81hdxl_user-manual_2002344022.webp)
VS-81HDxl - Connecting the VS-81HDxl
19
5.6
Controlling via the REMOTE Connector
The contact closure remote control pins operate in a similar way to the input
selector button. Using the contact closure remote control lets you route an input to
the outputs by remote control. To do so, temporarily connect the required input
(from 1 to 8) pin on the REMOTE terminal block connector to the GND (ground) pin.
You can also disconnect the outputs by temporarily connecting the OFF pin to the GND
pin.
DO NOT
connect more than one PIN to the GND PIN at the same
time.
For example, to route input 5 to the outputs, as the example in
Figure 11
illustrates,
momentarily touch input # 5 to the GND (ground) pin.
Figure 11: Using the REMOTE Connector
!