![background image](http://html1.mh-extra.com/html/kramer/vs-81hdxl/vs-81hdxl_user-manual_2002344010.webp)
VS-81HDxl - Overview
7
VS
-8
1
HD
–
Ov
e
rv
ie
w
7
Figure 2: VS-81HDxl 8x1 HD/SD
‑
SDI Switcher Rear Panel
#
Feature
Function
6
GENLOCK IN
BNC Connector
Connect to the genlock source
7
GENLOCK TERM
Button
Press to terminate the genlock source (75
) or release for looping to another unit
8
GENLOCK LOOP
BNC Connector
Connect to the GENLOCK connector of the next unit in the line
9
INPUTS
BNC Connectors
Connect to the serial digital video sources (from 1 to 8)
10
OUTPUTS SDI
BNC Connectors
Connect the two identical SDI outputs to serial digital video acceptors (1 and 2)
11
RS-485
Detachable Terminal Block Port
PIN G is for the ground connection; PINs B (-) and A (+) are for RS-485
12
RS-232
9-pin D-sub Port
Connects to the PC or the Remote Controller via a null-modem
13
REMOTE
Terminal Block Connector
Connect to contact closure switches (see
Section
5.5
)
14
MACHINE ID
DIP-switches
DIP-switches for setting the machine ID number
15
REMOTE IR
Opening
Connects to an optional external IR receiver unit for controlling the machine via an IR
remote controller (instead of using the front panel IR receiver)
16
ETH RESET
Button
Press to reset to factory default definitions:
First disconnect the power cord and then connect it again while pressing the ETH Factory
Reset button. The unit will power up and load its memory with the factory default definitions
IP number
192.168.1.39
Mask
– 255.255.255.0
Gateway
– 192.168.1.1
17
ETHERNET
Connector
Connects to the PC or other Serial Controller through computer networking
18
Power Connector with Fuse
AC connector enabling power supply to the unit