VS-42UHD - Protocol 3000
61
13.3.4.2 NET-DHCP
Functions
Permission
Transparency
Set:
NET-DHCP
Administrator
Public
Get:
NET-DHCP?
End User
Public
Description
Syntax
Set:
Set DHCP mode
#
NET-DHCP
SP
mode
CR
Get:
Get DHCP mode
#
NET-DHCP?
CR
Response
~nn@
NET-DHCP
SP
mode
CR LF
Parameters
mode
–
0
(do not use DHCP. Use the IP address set by the factory or the
NET-IP
command),
1
(try to
use DHCP. If unavailable, use the IP address set by the factory or the
NET-IP
command)
Response Triggers
Notes
Connecting Ethernet to devices with DHCP may take more time in some networks
To connect with a randomly assigned IP by DHCP, specify the device DNS name (if available) using the
NAME
command. You can also get an assigned IP by direct connection to USB or RS-232 protocol port if
available
Consult your network administrator for correct settings
K-Config Example
Enable DHCP mode, if available:
“#NET-DHCP 1”,0x0D
Summary of Contents for VS-42UHD
Page 1: ...USER MANUAL MODEL VS 42UHD 4x2 HDMI Matrix Switcher P N 2900 300609 Rev 1 www kramerAV com ...
Page 2: ......
Page 3: ......
Page 70: ......